Xiangtan Electrical Equipment Manufacturing Co., Ltd.
Main products:electric locomotive,electrical control equipment
Products
Contact Us
  • Contact Person : Ms. luo grace
  • Company Name : Xiangtan Electrical Equipment Manufacturing Co., Ltd.
  • Tel : 86-731-52326218
  • Fax : 86-731-52312474
  • Address : Hunan,xiangtan,NO 132 TANSHAO ROAD,XIANGTAN,HUNAN,CHINA
  • Country/Region : China
  • Zip : 411100

High and Low voltage current collector

High and Low voltage current collector
Product Detailed
High and low voltage curret collector 1.easy operation 2.easy maintance 3.reliable working condition

1.  Function

SZ1-W10 High and Low Voltage Current Collector is special designed for using with WK-10 mining excavator which manufactured by TAIYUAN HEAVY INDUSTRY CO., LTD. It leads the feeder line of 3phase AC50Hz/6kv from under propel device to swing platform, then lead the step down AC voltage and the rectified DC power from swing platform to propel device.

2.Construction Features

The current-collector is comprised of encloser, carbon brush part, the Ring part and swing accessories.

The encloser encludes high voltage encloser and low voltage encloser. The low voltage encloser is fixed on the swing platform by bolt, the high voltage encloser is fixed on the ring of low voltage encloser by fastener; coverplate on the top.

The carbon brush part is comprised of end cover, isolation bearing, brush box and carbon brush. The carbon brush part is put on the end cover of the Ring, then connected with the encloser by pull rod at the middle; when the encloser revolve with the platform,, the carbon brush revolves together.

The Ring part is comprised of end cover, isolation sleeve, high voltage ring, earthing ring and low voltage ring. After the alignment of low voltage current-collector edge and the under frame edge, fix them on the centre pivot, the bottom plate of  high voltage current-collector and the top plate of low voltage current-collector fix tegether by fastener.

The swing accessories means the bottem board, the Ring and the encloser were fixed  on the bottom board during the transpotation.

When working, the Ring is fixed on the centre pivot, and the carbon brush part is towed to the sleeve by pull rod, then connect the pull rod on the platform. When the excavator swing, the carbon brush part together with the platform move around the Ring through the bearing. There is wire on top of the Ring and the carbon brush, under the condition of power on, transfer the current from the propel device to swing platform, or transfer the current from the swing platform to propel device.

3.Technique information

High Voltage Slip Ring

Low Voltage Slip Ring

Proportion of Carbon Brush and Slip Ring(%)

Rated Voltage (V)

Rated Current (A)

Ring Quantity

Carbon  Contact Pressure(N)

Rated Voltage (V)

Rated Current (A)

Ring Quantity

Carbon  Contact Pressure(N)

6000

250

Working Ring3

8~15

DC780

250

4

8~15

60

AC380

20

5

5~8

Eathing Ring1

5~8

DC220

20

5

5~8

4.Dimension and installation size

Dimention

Dia×height

Mounting size

Dia

Mounting Hole

dia700×1833.5mm

dia650mm

8-M20mm

High and Low voltage current collector



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.